Categories
Articles
In order to fix this problem you'll need to isolate the unit from the power for 2 minutes and...
Error Code: E1 - Communication FaultThe error code 'E1' means that your indoor and outdoor units are having problems communicating...
Error Code: E3 - Internal Fan FaultWhen you see the error code 'E3', it is indicating that there is either a fault with the indoor...
Error Code: E4/E5 - Internal Temperature Sensor FaultThe error code 'E4' signifies a problem with the internal ambient air sensor. Whilst the error...
Error Code: EC - Refrigerant Leak DetectedThe error code 'EC' means that the system has detected the unit is not performing as well as it...
Error Code: F1/F2/F3 - External Temperature Sensor FaultThe error code 'F1' means outdoor ambient air sensor fault; 'F2' means outdoor coil sensor fault;...
Error Code: F4 - Outdoor PCB FaultThe error code 'F4' means that the memory chip on the outside PCB has failed. To fix the...
Error Code: F5 - Outdoor Fan Motor FaultThe error code 'F5' means that either there's a fault with the outdoor fan motor or outdoor PCB....
Error Code: P0 - IPM Module Fault (Intelligent Power Module)The IPM module is the inverter module which control the speed of the compressor and the outdoor...
Error Code: P1 - Overheat/Strong Current Protection For IPM ModuleThis error code is signifying a fault with the IPM module, it is either getting too hot or the...
RED '#' Symbol AppearingThe hashtag symbol appears when the unit is in a pre-heat cylce on start. It can also appear at...