Error Code: P1 - Evaporator Temperature Protection

The error code P1 is signifying the unit is getting too hot. 

You can check the indoor unit filters are clean and have a strong air flow - weak air flows means the components can overheat.

Check the indoor unit air intake vents are not blocked and check the indoor fan motor, to see if it is not damaged. You can do this by spinning the fan motor, if the fan motor spins freely with no resistance and no noise that means it is fine and not damaged. Otherwise, if there's a grinding noise or the fan doesn't spin freely, the fan motor is damaged and you will need to get a new one. 

To purchase any spare parts, contact us via email at info@airconditioningcentre.com or call us at 0370 3344 556. 

 

  • 0 Users Found This Useful
Was this answer helpful?

Related Articles

Error Code: F1 - Communication Fault

The error code ' F1' means the indoor unit PCB and outdoor unit PCB cannot communicate with each...

Error Code: F2/F3 - Internal Temperature Sensor Fault

Both error codes signify that there's a problem with the internal sensor. The difference between...

Error Code: F4 - Internal Fan Fault

The error code 'F4' is indicating either a fault with the indoor fan motor or indoor PCB. To...

Error Code: F6/F7/F9 - External Temperature Sensor Fault

All 3 error codes means there is something wrong with the sensors - the difference between the...

Error Code: FC - Compressor Drive Fault

This error is signifying a fault between the compressor and external PCB.  To fix the error code...