If this problem occurs, you'll need to do the following:
- Check the unit is programmed to the correct setting. I.e. set to cooling when cooling is required.
- Check the unit is set to the correct temperature. For example, if the room is 30 degrees and the unit is set to 16 degrees in cooling then the compressor will not start to protect itself. Always set the temperature 3-5 degrees lower than the room temperature and then lower the set temperature later on.
- Check if the compressor and outdoor fan is running, if they are then the refrigerant is low in the system. An engineer will be needed to check the refrigerant level.
If you require an engineer to check your unit - or any spare parts required - you can contact us via email at info@airconditioningcentre.com or call us at 0370 3344 556