Error Code: P4/P6/PA - Outdoor Temperature Sensor Fault

To fix this problem you'll need to do the following: 

  • Check the outdoor unit is clear of any obstructions, the outdoor unit requires good air flow to keep the coils clean
  • Check the outdoor unit sensors are connected the PCB correctly 
  • Check the sensor sockets are clean, these sensors are exposed to condensate water so the sockets can corrode, clean the sockets with a small light abrasive brush 

An engineer will be needed to check the refrigerant level is correct if the sensors are not a fault

If you need any spare parts or require an engineer, contact us email at info@airconditioningcentre.com or call us at 0370 3344 556. 

 

  • 4 Els usuaris han Trobat Això Útil
Ha estat útil la resposta?

Articles Relacionats

Error Code: F1 - Communication Fault

The error code ' F1' means the indoor unit PCB and outdoor unit PCB cannot communicate with each...

Error Code: F2/F3 - Internal Temperature Sensor Fault

Both error codes signify that there's a problem with the internal sensor. The difference between...

Error Code: F4 - Internal Fan Fault

The error code 'F4' is indicating either a fault with the indoor fan motor or indoor PCB. To...

Error Code: F6/F7/F9 - External Temperature Sensor Fault

All 3 error codes means there is something wrong with the sensors - the difference between the...

Error Code: FC - Compressor Drive Fault

This error is signifying a fault between the compressor and external PCB.  To fix the error code...