Error Code: F1/F2/F3 - External Temperature Sensor Fault

The error code 'F1' means outdoor ambient air sensor fault; 'F2' means outdoor coil sensor fault; 'F3' means outdoor compressor sensor fault. 

To fix either problems you'll need to check the connection between the sensors and the PCB is firmly connected. Then check the sensor sockets are clean, as these are exposed to condensate water so they can corrode - if you find corrosion on the sensor sockets, then use a small abrasive brush in order to clean the sockets. 

If the sensors are connected properly and sockets are clean then the sensor set needs to be replaced. To replace the sensor set you'll need to contact us via email at info@airconditioningcentre.com or call us at 0370 3344 556. 

ANY WIRING OR CLEANING OF CONNECTIONS REQUIRE THE POWER TO BE ISOLATED BEFORE WORKS COMMENCE.

 

  • 143 Els usuaris han Trobat Això Útil
Ha estat útil la resposta?

Articles Relacionats

Error Code: E0/E2 - Indoor PCB Malfunction

In order to fix this problem you'll need to isolate the unit from the power for 2 minutes and...

Error Code: E1 - Communication Fault

The error code 'E1' means that your indoor and outdoor units are having problems communicating...

Error Code: E3 - Internal Fan Fault

When you see the error code 'E3', it is indicating that there is either a fault with the indoor...

Error Code: E4/E5 - Internal Temperature Sensor Fault

The error code 'E4' signifies a problem with the internal ambient air sensor. Whilst the error...

Error Code: EC - Refrigerant Leak Detected

The error code 'EC' means that the system has detected the unit is not performing as well as it...