Error Code: FC - Compressor Drive Fault

When the error code 'FC' appears you'll need to do the following to fix the problem: 

  • Power on the unit again and check the operation of the compressor is normal, if not then the compressor will need replacing by an F-Gas registered engineer. 
  • Check whether the connection of the compressor is reliable, otherwise you'll need to repair it. 
  • Check whether the components on the electric control board have been damaged, if they are damaged, the components or the electric control board should be replaced. 

For any further help or any spare parts contact us via email at info@airconditioningcentre.com or call us at 0370 3344 556.

 

  • 11 Kunder som kunne bruge dette svar
Hjalp dette svar dig?

Relaterede artikler

Error Code: F9 - The Compressor Discharge Temperature Sensor Fault

When the error code 'F9' appears, you can do the following to fix the problem:  Check whether...

Error Code: F1 - Communication Fault

When the error code 'F1' appears you can do the following  to fix the problem:  Check whether...

Error Code: F2 - The Indoor Ambient Temperature Sensor Fault

When the error code 'F2' appears you can do the following to fix the problem:  Check whether...

Error Code: F3 - The Coil Pipe Temperature Sensor Of Indoor Unit Fault

If the error code 'F3' appears, you can do the following to try and fix the problem:  Check...

Error Code: F4 - Indoor Fan Fault

When the error code 'F4' appears you can do the following to try and fix the problem:  Check...