Error Code: EC - Refrigerant Leak Detected

The error code 'EC' means that the system has detected the unit is not performing as well as it should - so it has gone into a protection mode, to protect the compressor from being damaged. 

This error can be caused by dirty filters so check the filters are clean. If the filters are clean then an engineer is required to check the refrigerant levels and recharge the system. To get in contact with an engineer about this problem you can contact us - so we can find the nearest and best engineer for you - via email at info@airconditioningcentre.com or call us at 0370 3344 556. 

  • 42 Kasutajad peavad seda kasulikuks
Kas see vastus oli kasulik?

Seotud artiklid

Error Code: E0/E2 - Indoor PCB Malfunction

In order to fix this problem you'll need to isolate the unit from the power for 2 minutes and...

Error Code: E1 - Communication Fault

The error code 'E1' means that your indoor and outdoor units are having problems communicating...

Error Code: E3 - Internal Fan Fault

When you see the error code 'E3', it is indicating that there is either a fault with the indoor...

Error Code: E4/E5 - Internal Temperature Sensor Fault

The error code 'E4' signifies a problem with the internal ambient air sensor. Whilst the error...

Error Code: F1/F2/F3 - External Temperature Sensor Fault

The error code 'F1' means outdoor ambient air sensor fault; 'F2' means outdoor coil sensor fault;...