Error Code: DF - Defrosting Code

The DF code appears when the unit is in a pre heat cycle on start up. 

It can also appear at random times of the day, this is normal during the winter months as it is signifying the outdoor unit is in a defrost mode. This lasts between 3-6 minutes. 

If this code is showing for more than 10 minutes then try setting the temperature lower to ease the pressure of the outdoor unit. 

If this code continues to show then the system is low on refrigerant and needs an engineer to check for leaks and top up the gas. 

If you require an engineer contact us via email at info@airconditioningcentre.com or call us at 0370 3344 556.

 

  • 123 Utenti hanno trovato utile questa risposta
Hai trovato utile questa risposta?

Articoli Correlati

Error Code: F1 - Communication Fault

The error code ' F1' means the indoor unit PCB and outdoor unit PCB cannot communicate with each...

Error Code: F2/F3 - Internal Temperature Sensor Fault

Both error codes signify that there's a problem with the internal sensor. The difference between...

Error Code: F4 - Internal Fan Fault

The error code 'F4' is indicating either a fault with the indoor fan motor or indoor PCB. To...

Error Code: F6/F7/F9 - External Temperature Sensor Fault

All 3 error codes means there is something wrong with the sensors - the difference between the...

Error Code: FC - Compressor Drive Fault

This error is signifying a fault between the compressor and external PCB.  To fix the error code...