Error Code: F4 - Internal Fan Fault

The error code 'F4' is indicating either a fault with the indoor fan motor or indoor PCB.

To check which one just follow the instructions below:

  • isolate the unit from the power, then open the air vain and spin the fan blade by hand - the fan blade should spin freely with no resistance and no noise. If the fan does not spin freely or a grinding noise is heard then the fan motor needs replacing. 
  • If the fan spins freely with no noise then there is a fault with the internal PCB - the internal PCB sends voltage to the fan motor. Check the fan motor is connected firmly to the PCB. If there's no fault with the connections then the indoor PCB needs to be replaced. 

note: the indoor fan motor is connected to the PCB with 2 connections, 1 is the power supply and the other is the communication line.  

If you would like to purchase a new PCB or fan motor - or for any further questions - contact us via email at info@airconditioningcentre.com or call us at 0370 3344 556.

 

  • 279 Корисниците го најдоа ова како корисно
Дали Ви помогна овој одговор?

Понудени резултати

Error Code: F1 - Communication Fault

The error code ' F1' means the indoor unit PCB and outdoor unit PCB cannot communicate with each...

Error Code: F2/F3 - Internal Temperature Sensor Fault

Both error codes signify that there's a problem with the internal sensor. The difference between...

Error Code: F6/F7/F9 - External Temperature Sensor Fault

All 3 error codes means there is something wrong with the sensors - the difference between the...

Error Code: FC - Compressor Drive Fault

This error is signifying a fault between the compressor and external PCB.  To fix the error code...

Error Code: F5 - IPM Module Fault ( Intelligent Power Module )

The IPM module is the inverter module which controls the speed of the compressor and the outdoor...