Error Code: E0/E2 - Indoor PCB Malfunction

In order to fix this problem you'll need to isolate the unit from the power for 2 minutes and then restart. 

After restarting and the error code is still showing then the indoor PCB needs to be replaced. These error codes are signifying that the memory chip on the PCB has malfunctioned and lost its memory. 

To replace the PCB you can contact us via email at info@airconditioningcentre.com or call us at 0370 3344 556. 

 

  • 7 brukere syntes dette svaret var til hjelp
Var dette svaret til hjelp?

Relaterte artikler

Error Code: E1 - Communication Fault

The error code 'E1' means that your indoor and outdoor units are having problems communicating...

Error Code: E3 - Internal Fan Fault

When you see the error code 'E3', it is indicating that there is either a fault with the indoor...

Error Code: E4/E5 - Internal Temperature Sensor Fault

The error code 'E4' signifies a problem with the internal ambient air sensor. Whilst the error...

Error Code: EC - Refrigerant Leak Detected

The error code 'EC' means that the system has detected the unit is not performing as well as it...

Error Code: F1/F2/F3 - External Temperature Sensor Fault

The error code 'F1' means outdoor ambient air sensor fault; 'F2' means outdoor coil sensor fault;...