Error Code: FF - Outdoor Unit Fault

This fault code 'FF' can mean many different things related to the outdoor units components. To check which component is faulty, you'll need to:

  • Check if the compressor runs for 1 minute and the outdoor fan does not start, this means there is a fault with the outdoor fan motor
  • Check if the compressor and fan run for 1 minute and then shuts down, this means there is fault with the 4 way valve. Check the solenoid is connected to the PCB properly. Does the unit operate in the other mode, if so then the valve is faulty. 
  • Check the outdoor PCB for damage, if there are any burn marks then the PCB needs replacing. 

note: commonly this error signifies the system is low on refrigerant. An engineer is needed to check for leaks and recharge the system. 

If you want to purchase any new parts for your unit, contact us via email at info@airconditioningcentre.com or call us at 0370 3344 556.

 

 

  • 12 användare blev hjälpta av detta svar
Hjälpte svaret dig?

Relaterade artiklar

Error Code: F1 - Communication Fault

The error code ' F1' means the indoor unit PCB and outdoor unit PCB cannot communicate with each...

Error Code: F2/F3 - Internal Temperature Sensor Fault

Both error codes signify that there's a problem with the internal sensor. The difference between...

Error Code: F4 - Internal Fan Fault

The error code 'F4' is indicating either a fault with the indoor fan motor or indoor PCB. To...

Error Code: F6/F7/F9 - External Temperature Sensor Fault

All 3 error codes means there is something wrong with the sensors - the difference between the...

Error Code: FC - Compressor Drive Fault

This error is signifying a fault between the compressor and external PCB.  To fix the error code...