Error Code: P2 - Overheat, Over Current Protection Of Inverter Module

When the error code 'P2' appears, you can do the following to fix the problem: 

  • Check whether the fixation between the IPM module and the coil is firm. 
  • Check whether the compressor is well, otherwise replace it. 
  • Check whether the IPM module is abnormal, otherwise replace it. 

For any spare parts or any further help contact us via email at info@airconditioningcentre.com or call us at 0370 3344 556. 

 

  • 10 Users Found This Useful
Was this answer helpful?

Related Articles

Error Code: F9 - The Compressor Discharge Temperature Sensor Fault

When the error code 'F9' appears, you can do the following to fix the problem:  Check whether...

Error Code: F1 - Communication Fault

When the error code 'F1' appears you can do the following  to fix the problem:  Check whether...

Error Code: F2 - The Indoor Ambient Temperature Sensor Fault

When the error code 'F2' appears you can do the following to fix the problem:  Check whether...

Error Code: F3 - The Coil Pipe Temperature Sensor Of Indoor Unit Fault

If the error code 'F3' appears, you can do the following to try and fix the problem:  Check...

Error Code: F4 - Indoor Fan Fault

When the error code 'F4' appears you can do the following to try and fix the problem:  Check...