Error Code: P7 - Low Or High Voltage Protection

When the error code 'P7' appears you can do the following to fix the problem: 

  • Check whether the supply voltage is out of range, from 150V to 270V
  • Check the voltage detection circuit of the IPM base board is abnormal, if it is abnormal the IPM base board or the electric control board should be replaced. 

For any further help or any spare parts needed, contact us via email at info@airconditioningcentre.com or call us at 0370 3344 556. 

  • 50 Users Found This Useful
Was this answer helpful?

Related Articles

Error Code: F9 - The Compressor Discharge Temperature Sensor Fault

When the error code 'F9' appears, you can do the following to fix the problem:  Check whether...

Error Code: F1 - Communication Fault

When the error code 'F1' appears you can do the following  to fix the problem:  Check whether...

Error Code: F2 - The Indoor Ambient Temperature Sensor Fault

When the error code 'F2' appears you can do the following to fix the problem:  Check whether...

Error Code: F3 - The Coil Pipe Temperature Sensor Of Indoor Unit Fault

If the error code 'F3' appears, you can do the following to try and fix the problem:  Check...

Error Code: F4 - Indoor Fan Fault

When the error code 'F4' appears you can do the following to try and fix the problem:  Check...