Categorieën

Artikelen

 Error Code: E0/E2 - Indoor PCB Malfunction

In order to fix this problem you'll need to isolate the unit from the power for 2 minutes and...

 Error Code: E1 - Communication Fault

The error code 'E1' means that your indoor and outdoor units are having problems communicating...

 Error Code: E3 - Internal Fan Fault

When you see the error code 'E3', it is indicating that there is either a fault with the indoor...

 Error Code: E4/E5 - Internal Temperature Sensor Fault

The error code 'E4' signifies a problem with the internal ambient air sensor. Whilst the error...

 Error Code: EC - Refrigerant Leak Detected

The error code 'EC' means that the system has detected the unit is not performing as well as it...

 Error Code: F1/F2/F3 - External Temperature Sensor Fault

The error code 'F1' means outdoor ambient air sensor fault; 'F2' means outdoor coil sensor fault;...

 Error Code: F4 - Outdoor PCB Fault

The error code 'F4' means that the memory chip on the outside PCB has failed.  To fix the...

 Error Code: F5 - Outdoor Fan Motor Fault

The error code 'F5' means that either there's a fault with the outdoor fan motor or outdoor PCB....

 Error Code: P0 - IPM Module Fault (Intelligent Power Module)

The IPM module is the inverter module which control the speed of the compressor and the outdoor...

 Error Code: P1 - Overheat/Strong Current Protection For IPM Module

This error code is signifying a fault with the IPM module, it is either getting too hot or the...

 RED '#' Symbol Appearing

The hashtag symbol appears when the unit is in a pre-heat cylce on start.  It can also appear at...