Error Code: P1 - Overheat/Strong Current Protection For IPM Module

This error code is signifying a fault with the IPM module, it is either getting too hot or the power supply is too high.

  • Check the outdoor unit is clear of any obstructions, there must be strong air flow to the back of the unit.
  • Check the power supply is suitable for the system.
  • Check the IPM module is firmly screwed down to the PCB case.
  • Check for damage to the IPM module, if damaged then it needs to be replaced.
  • Check for damage to the compressor, an engineer will be required to check this.

If you need an engineer or spare parts, you can contact us via email at info@airconditioningcentre.com or call us at 0370 3344 556

ANY WIRING OR CLEANING OF CONNECTIONS REQUIRE THE POWER TO BE ISOLATED BEFORE WORKS COMMENCE.

  • 0 Users Found This Useful
Was this answer helpful?

Related Articles

Error Code: E0/E2 - Indoor PCB Malfunction

In order to fix this problem you'll need to isolate the unit from the power for 2 minutes and...

Error Code: E1 - Communication Fault

The error code 'E1' means that your indoor and outdoor units are having problems communicating...

Error Code: E3 - Internal Fan Fault

When you see the error code 'E3', it is indicating that there is either a fault with the indoor...

Error Code: E4/E5 - Internal Temperature Sensor Fault

The error code 'E4' signifies a problem with the internal ambient air sensor. Whilst the error...

Error Code: EC - Refrigerant Leak Detected

The error code 'EC' means that the system has detected the unit is not performing as well as it...